Link electronic PDP-886 Dépliant
CLOSED CAPTION SERIES
MADE IN THE USA
LINK ELECTRONICS, INC.
SD SDI VIDEO
CLOSED CAPTION ENCODER/DECODER
CLOSED CAPTION ENCODER/DECODER
MODEL PDP-886
FEATURES
Dual Microprocessor
EDH Processing
SD SDI Input/Output
Optional, Dual Modem
RS232 OR RS422 Data Inputs
Encode/Decode Field 1 and Field 2
Two Encoded Serial Digital Outputs
Two Open-Caption Decoded SD Analog
Two Closed Caption Encoded SD Analog
V-Chip Compatible
SD SDI PDP-886. When the PDP-886 is used with
closed caption software, the unit inserts Closed
Caption data into a component serial digital data-
stream. There are two encoded serial digital outputs
plus four SD Analog NTSC/PAL outputs. One set of
the SD Analog outputs are open caption and the
second SD Analog set of outputs are closed caption.
closed caption software, the unit inserts Closed
Caption data into a component serial digital data-
stream. There are two encoded serial digital outputs
plus four SD Analog NTSC/PAL outputs. One set of
the SD Analog outputs are open caption and the
second SD Analog set of outputs are closed caption.
Serial control is handled via two RS-232/422 ports,
selectable by an internal switch. A front panel LCD
indicates Encode, Standard, Decode and Baud Rate.
There are two microprocessors incorporated, two
ports for each microprocessor (RS-232/422 and
modem). The SD SDI signal will bypass in case of
AC failure on one output.
selectable by an internal switch. A front panel LCD
indicates Encode, Standard, Decode and Baud Rate.
There are two microprocessors incorporated, two
ports for each microprocessor (RS-232/422 and
modem). The SD SDI signal will bypass in case of
AC failure on one output.
An encoded test message may also be selected from
the front panel, showing Link as the manufacturer
name, model number and firmware version. A total
of nine data channels for video line 21 may be
selected: CC1, CC2, T1, and T2 in Field 1 along with
CC3, CC4, T3, T4, and XDS in Field 2.
the front panel, showing Link as the manufacturer
name, model number and firmware version. A total
of nine data channels for video line 21 may be
selected: CC1, CC2, T1, and T2 in Field 1 along with
CC3, CC4, T3, T4, and XDS in Field 2.
A built-in EDH (Error Detection and Handling)
processor can monitor the incoming signal for
impairments and insert new EDH data. This function
will insure that the output EDH Checksum will reflect
the new Line 21 waveform. An optional internal
telephone modem is available for each processor.
Three LED’s on the front panel indicate RI, OH, and
CD.
processor can monitor the incoming signal for
impairments and insert new EDH data. This function
will insure that the output EDH Checksum will reflect
the new Line 21 waveform. An optional internal
telephone modem is available for each processor.
Three LED’s on the front panel indicate RI, OH, and
CD.
LINK
ELECTRONICS, INC.
2137 Rust Avenue
Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255