Combi 8100 Manuale Utente
57
Lap Belt with Motorized Shoulder Belt (fig. e)
DO NOT use with any car seat.
See your vehicle dealer for options
for securing a child restraint in this
location.
for securing a child restraint in this
location.
Passive Restraints
Lap or Shoulder Belt Mounted on Front Door (fig. f)
DO NOT use with any car seat.
Belts will not stay tight while driving.
Belts will not stay tight while driving.
See your vehicle dealer for options
for securing a child restraint in this
location.
for securing a child restraint in this
location.
(fig. e)
(fig. f)
Pull out on latch plate. If belt slides freely
through latch plate
through latch plate
(fig. g)
, the belt lock-off
MUST be used (see Belt Lock-off section).
Some combination lap/shoulder belts with
free sliding latch plates may be converted
into an “automatic locking mode”. Always
use the belt lock-off with these belt
systems.
free sliding latch plates may be converted
into an “automatic locking mode”. Always
use the belt lock-off with these belt
systems.
Vehicle seat belts with locking latch plates
(fig. h)
normally hold a car seat tightly.
However in some cases, the locking latch
plate on some seat belts may slip and
loosen after being buckled on car seat if
positioned at a certain angle. If this
happens, flip the latch plate over and
re-buckle. Test installation again to see
if this works. If not, move car seat to
another seating location.
plate on some seat belts may slip and
loosen after being buckled on car seat if
positioned at a certain angle. If this
happens, flip the latch plate over and
re-buckle. Test installation again to see
if this works. If not, move car seat to
another seating location.
58
(fig. g)
(fig. h)
Flip
Combination Lap/Shoulder Belt with Free Sliding Latch Plate
Combination Lap/Shoulder Belt with Locking Latch Plate