Burley d'lite Manuale Utente

     

B U R L E Y   S T R O L L E R   K I T   O W N E R ’ S   I N S T R U C T I O N   A N D   S A F E T Y   M A N U A L 

To adjust the tracking of the stroller wheel (which allows the stroller to roll 
straight), loosen set screw with 5/32" hex wrench, adjust the bushing with 
a 3/4" wrench. (See the illustration below or above). Turn the bushing until 
the wheel is perpendicular to the ground. Test the tracking by pushing the 
stroller away from you to make sure it rolls straight. Make any additional 
adjustments before putting your child in the trailer. 
When aligned tighten set screw.

The wheel must be placed in the up position in order to attach the trailer to 
a bicycle. The conversion from “Stroller” (down) position to “Bike trailer” 
(up) position, is quick and requires no tools. First, engage the parking brake. 
Loosen the wheel pivot assembly knob by turning it counterclockwise, until 
the  triangular  pivot  section  can  be  rotated.  Swing  the  wheel  up  until  the 
word “BIKE” on the triangular pivot section appears. The arrow should point 
at the “B” in “BIKE”. Line up the small triangular section with the larger 
triangular  section  (with 
“BIKE”  printed  on  it). 
Tighten  the  knob.  Now 
attach the trailer to your 
bike,  using  your  Burley 
hitch,  retaining  pin  or 
bolt, and safety strap.

Bushing

Set Screw

Shown without wheel 

pivot assembly knob