NEC l102w Manuale Utente

41 ... English

•  Use the projector’s storage area as a temporary storage.

Back up your data on your computer’s hard disk drive before using the projector 

as a storage device. We will not be liable for any data loss or damage that could 

result from using the projector.

If your data is not to be used for a long period time, delete them from the projec-

tor’s storage area.

•  We will not be liable for any data loss or damage that could result from the 

projector’s failure or any cause, and we will not be liable for your loss of busi-

ness arising from the data loss or damage.

Our service includes hardware only (not including data recovery).

You can use part of the memory inside the pro-

jector as your storage device.
This memory area can be used for saving and 

loading your photos, audio, video, and Office 

Reader files.

1.

  Turn on the projector.

2.

   

Press the USB-B button to display the Multimedia and select USB-B 

(Connect PC) source.

3.

   

Use a commercially available USB cable to connect the USB-B port 

of the projector and the USB port (A type) of your computer.

4.   Press the   button to select “Storage Mode” and then press “EN-

TER”. 

   When you see a message as left, the drive has been added to your 

computer. This allows you to read and write files to the drive of the 

projector. 

5.   Double clicks the drive of the projector on the Windows “Com-

puter” or “My Computer” on your computer.

   You can access two drives of the projector to read or write files.

•  PtG2-setup.exe”is stored on one drive. You cannot store files to this drive. This 

drive is read-only. Use the other drive as a storage drive.

•  For more information on “PtG2-setup.exe”, refer to “Application Guide” on 

the supplied CD-ROM.