NEC l102w Manuale Utente

45 ... English

Appendices

Problem: No image appears on screen



Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.



Ensure the pins of connectors are not crooked or broken.



Make sure the projector is switched on.

Problem: Partial, scrolling or incorrectly displayed image



Press “AUTO ADJ.” on the remote control.



If you are using a PC:

For Windows 95, 98, 2000, XP, Windows 7:
1. From the “My Computer” icon, open the “Control Panel” folder,

and double click the “Display” icon.

  2.  Select the “Settings” tab
  3.  Click on the “Advanced Properties”.
  For Windows Vista:
  1.   From the “My Computer” icon, open the “Control Panel” folder,

and double click the “Appearance and Personalization”

2. Select “Personalization”
3. Click “Adjust screen resolution” to display “Display Settings”.

Click on the “Advanced Settings”.

If the projector is still not projecting the whole image, you will

also need to change the monitor display you are using. Refer to

the following steps.

4. Verify the resolution setting is less than or equal to 1280 x 1024

resolution.

5. Select the “Change” under the “Monitor” tab .

Troubleshooting

If you experience trouble with the projector, refer to the fol-

lowing information. If the problem persists, please contact

your local dealer or service center.