Benq MP622 Manuale Utente

Pagina di 63
Maintenance
52
Lamp information
Calculation of lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically 
calculated by the built-in timer. The method of calculating the equivalent lamp hour is as 
follows:
Total (equivalent) lamp hour
= 1 (hours used in Economic mode) + 4/3 (hours used in normal mode)
See 
 for more information on Economic mode.
The lamp hour in Economic mode is calculated as 3/4 of that in normal mode. That is, using 
the projector in Economic mode helps to extend the lamp hour by 1/3.
Warning message
When the Lamp indicator lights up red or a message appears suggesting it is time to replace 
the lamp, please install a new lamp or consult your dealer. An old lamp may cause a 
malfunction in the projector and in some instances the lamp may explode.
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too 
hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator 
still lights up after turning the power back on, please contact your dealer. See 
 for details.
The following Lamp warning displays will remind you to change the lamp.
Message
Status
The lamp has been in operation for 3000 hours. 
Install a new lamp for optimal performance. If the 
projector is normally run with "Economic Mode" 
selected (See 
), 
you may continue to operate the projector until the 
3950 hour lamp warning appears. 
The lamp has been in operation for 3950 hours. A 
new lamp should be fitted to avoid the 
inconvenience when the projector runs out of lamp 
time.
OK
Order Replacement Lamp
Lamp > 3000 Hours
Notice
OK
Replace Lamp Soon 
Lamp > 3950 Hours
Notice