Hoshizaki F-300BAF Manuale Utente

45

Ensure all components, fasteners and thumbscrews are securely in place after 
any maintenance or cleaning is done to the equipment.

1. HOSHIZAKI recommends cleaning this unit at least once a year. More 

frequent cleaning, however, may be required in some existing water 
conditions.

2. To prevent injury to individuals and damage to the icemaker, do not use

    ammonia type cleaners.

3. Always wear liquid-proof gloves to prevent the cleaning and sanitizing 

solutions from coming into contact with skin.

Dilute 4.8 fl. oz. (142 ml) of Hoshizaki "Scale Away" with 0.8 gallons (3 l) of warm water. 
This is a minimum amount. Make more solution if necessary.

For safety and maximum effectiveness, use the solution immediately after 
dilution.

1) Unplug the unit from the electrical outlet then remove the front panel and the top panel.
2) Close the water supply line shut-off valve.
3) Remove all ice from the storage bin.
4) Move the flush switch to the "FLUSH" position.
5) Plug the unit back in and turn on the power 

supply and drain out all water from the 
water line.

6) Turn off the power supply.

Note: This unit is designed to start operating when the 

reservoir is filled with water.

7) In the storage bin, remove the thumbscrews attaching spout (B), then remove spout (B) 

and spout packing (B).  See Fig. 3.

Thumbscrews

Spout (B)

Spout Packing (B)