Exmark LAZER Z HP Manuale Utente
- 13 -
2.5.5
Deck Lift Assist Lever: Foot pedal that assists in raising the deck.
2.6
SEAT
2.6.1
Type:
All units except Kohler EFI: Standard seat with high back, foam padded (internal
suspension) and armrests.
suspension) and armrests.
Kohler EFI units: Standard seat with high back, foam padded (internal suspension),
armrests and a custom ride suspension system.
armrests and a custom ride suspension system.
Optional seat accessories:
• Custom ride suspension system to enhance Standard Seat.
• Deluxe suspension seat with high back, low profile foam-in-place cushion
• Custom ride suspension system to enhance Standard Seat.
• Deluxe suspension seat with high back, low profile foam-in-place cushion
(dampened, adjustable spring suspension) and armrests.
2.6.2
Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other
components. Held in tilted position with prop rod. Adjustable fore and aft seat track.
components. Held in tilted position with prop rod. Adjustable fore and aft seat track.
2.6.3
Armrests: Standard seat: foam padded flip-up armrests with height adjustment.
Optional suspension seat: molded adjustable flip-up
armrests.
2.6.4
Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay
seat switch eliminates rough ground cut-outs.
seat switch eliminates rough ground cut-outs.
2.7 HYDROSTATIC GROUND DRIVE SYSTEM
2.7.1
Hydrostatic Pumps: Two Hydro Gear PJ variable displacement piston pumps.
2.7.2
Wheel Motors: Two Parker TL with 1 1/4” tapered shafts.
2.7.3
Hydraulic Oil Type: Synthetic Mobil 1 15W-50.
2.7.4
Hydraulic Oil Capacity: 2.1 qt.(2.0 L.)
2.7.5
Hydraulic Filter: Replaceable cartridge type.
P/N 1-513211: 10 microns, 18 psi bypass (Summer use above 32
° F (0°C))
P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32
° F (0°C))
2.7.6
Speeds: 0-9.8 mph (15.8 km/hr) forward.
0-6.3 mph (10.1 km/hr) reverse.
2.7.7
Drive wheel release valves allow machine to be moved when engine is not running.
2.8 TIRES
Drive Front
Caster
Pneumatic
(Air-Filled)
Semi-Pneumatic
Deck Size
52”
60” & 72”
All Decks
Quantity 2
2
2
Tread
“Multi- Trac C/S”
Smooth
Size
24 x 9.50-12
24 x 12.00-12
13 x 6.50-6
Ply Rating
4
4
Pressure
13 psi (90 kPa)
13 psi (90 kPa)
2.9 CUTTING DECK
2.9.1
Cutting Width:
52 in. (132.1 cm)
60 in. (152.4 cm)
72 in. (182.9 cm)
2.9.2
Discharge: Side
2.9.3
Blade Size: (3 ea.) w/52” Deck 18.0 in. (45.7 cm)
w/60” Deck 20.5 in. (52.1 cm)
w/72” Deck 24.5 in. (62.2 cm)
2.9.4
Blade Spindles: Solid steel spindles with 1” I.D. bearings.