Dolmar PS7300 Manuale Utente

31

this saw (see the Extract from the spare-parts list)!
Check the sprocket before mounting a new chain.
Worn out sprockets (12) may damage the new chain and must 

therefore be replaced.
Remove the sprocket guard (1) (See "PUTTING INTO OPE-

RATION" figs. B).
Remove the chain and guide bar.
Remove circlip (13).
CAREFUL: The circlip will jump out of the groove unless you 

hold it down with your thumb while removing it.
Remove thrust washer (15).
Replace the old sprocket (12) with a new one (16). For the part 

number consult the “Extract from the spare parts list”.
Assemble the new sprocket, thrust washer and circlip.
For replacing the guide bar, chain, and sprocket see "PUTTING 

INTO OPERATION A-H".
NOTE:
New chains stretch, so check the chain tension frequently (see 

“Checking the chain tension”).

The  felt  filter (17) can become clogged. It is recommended to 

replace the fuel filter once every three months in order to ensure 

unimpeded fuel flow to the carburetor.
To remove the fuel filter for replacement, pull it out through  

the tank filler neck using a piece of wire. Bent wire at one end 

to form a hook.

CAUTION: Protective gloves must be worn.
Regularly  inspect  the  bearing  surfaces  of  the  guide  bar  for 

damage, and clean them with a suitable tool.