Konica Minolta bizhub 180 Manuale Utente
5.4 Making Copies on Manually Fed Paper
5
bizhub 180
5-19
Be
for
e M
ak
in
g Co
pie
s
Cha
p
ter 5
To copy using the Multi bypass tray
1
Load the document to be copied.
❍
Refer to “
2
Adjust the Bypass tray extender and
the paper guides to fit the size of the
paper.
the paper guides to fit the size of the
paper.
3
Load the paper with the front side
facing down, lightly sliding the paper
as much as possible into the feed slot.
facing down, lightly sliding the paper
as much as possible into the feed slot.
The manual bypass mark (
)
appears in the bottom line of the
screen.
screen.
?
Are sheets of cards or postcards
loaded?
loaded?
➜
Make sure that they are not curled
(rolled).
(rolled).
4
Check that “YES/NO” appears in the
bottom line of the screen, and then
press the [No/C] key.
bottom line of the screen, and then
press the [No/C] key.
The “PAPER SOURCE SETUP”
menu appears.
menu appears.
✎
Note
“
“
YES/NO
”
is displayed for approximately 5 seconds after paper is loaded
into the Multi bypass tray.
5
Use the
and
keys to select
the type of paper loaded.
❍
Select from the following four
paper type settings.
“PLAIN”
“OHP”
“CARD”
“ENVELOPE”
paper type settings.
“PLAIN”
“OHP”
“CARD”
“ENVELOPE”