Woods Equipment MZ2661K Manuale Utente

Construction:  Aluminum block with cast-in cast iron 
sleeves. Aluminum head.
Configuration:  4-stroke, vertical shaft, V-twin cylin-
der, overhead valve, air-cooled.

Full hydrostatic pump and wheel motor combination 
for independently controlled drive wheels.

Pump: Hydrogear12cc variable displacement piston 
pump.

Motors:  Parker displacement MB series.  Direct 
drive 1-1/4” (31.8mm) diameter output shaft.

Turn Radius:  True Zero

Start:  The PTO (blades) must be off, traction levers 
in neutral lock, and parking brake on for engine to 
crank.

Run:  Operator must be in seat to take parking brake 
off, to move traction levers out of the neutral lock 
position, or to turn the PTO (blades) on or the engine 
will kill.  The parking brake must be off for the traction 
levers to move out of the neutral lock position.

The operator may leave the seat with the engine 
running if the parking brake is on, the PTO (blades) 
is off, and the traction levers are in the neutral lock 
position.  A time delay eliminates annoying engine 
cutout from operation over rough terrain.

1256 lbs (570 kg) w/52" deck
1293 lbs (587 kg) w/61" deck

Throttle; choke; power takeoff (PTO) clutch switch; 
traction levers; parking brake lever; lift lever.

One tank on each side of operator, each with a shut-
off (1/4 turn).  Total capacity 14 gallons (52.9 liters).  
Fuel selector/shutoff switch on rear cooler mounting 

bracket(1/4 turn).  Replaceable fuel filter.

Forward:  11.5 mph (18.5 km/h)

Reverse:  4 mph (6.4 km/h)

Drive wheels:  

872500G: 

23 X 10.5-12 4-Ply Turf  

 

 

Tread Tires

872502G: 

24 X 12.00-12 4-Ply Turf  

 

 

 

Tread Tires

Casters: 

13 X 6.5-6 No-Flat tires

  
Pressure:   14 p.s.i. (1 kg/cm

2

)

BRAKING:
Parker brakes.  Spring applied for overload 
protection.

High back, foam padded full suspension seat with 
standard armrests.  Fore and aft adjusters, hinged for 
easy tilt-up access to pumps and battery.  Internally 
mounted seat switch.