Miele H 390 Manuale Utente
Installing a cooker
The appliance must only be oper-
ated when it has been built-in.
ated when it has been built-in.
When installing the cooker:
– There must not be a unit rear panel
fitted behind the cooker.
– If an interim shelf is fitted beneath
the oven, a cut-out is required as
close to the wall as possible to en-
sure that there is sufficient ventilation
for the appliance.
The shape of the cut-out is not im-
portant, as long as cut-out measures
at least 150 cm
close to the wall as possible to en-
sure that there is sufficient ventilation
for the appliance.
The shape of the cut-out is not im-
portant, as long as cut-out measures
at least 150 cm
2
.
Do not fit insulation material inside
the housing unit. This would hinder
the intake of air to cool the appli-
ance.
the housing unit. This would hinder
the intake of air to cool the appli-
ance.
H 373, H 383
^ Push the cooker into the housing unit
as far as the oven trim and align.
^ Open the oven door and using two
screws secure the oven to the side
walls of the housing unit through the
holes in the oven trim.
walls of the housing unit through the
holes in the oven trim.
Installation - cooker and hob control unit
77