Miele H 390 Manuale Utente
Time of day
(24 hour display)
When the appliance is first connected
to the power supply, or after a power
cut "12:00" and the symbols "f" and
")" flash in the display.
to the power supply, or after a power
cut "12:00" and the symbols "f" and
")" flash in the display.
Press buttons "f" and ")" at the
same time.
same time.
The following light up:
– "12:00" in the display
– the indicator light for the "+/–" button.
– "12:00" in the display
– the indicator light for the "+/–" button.
While the indicator light between the
"+" and "–" button is lit, the time of
day can be entered in hours:minutes
using the "+" or "–" button.
"+" and "–" button is lit, the time of
day can be entered in hours:minutes
using the "+" or "–" button.
When the indicator light for the "+/–" but-
ton goes out, the time of day has been
set and the display will change at one-
minute intervals. The colon flashes.
ton goes out, the time of day has been
set and the display will change at one-
minute intervals. The colon flashes.
If a process has been pre-
programmed, the time of day can-
not be altered or cancelled.
programmed, the time of day can-
not be altered or cancelled.
The programmable functions 07 and 08
can be used to adjust the time from
winter to summer time and vice versa
(see section on "Altering oven settings").
can be used to adjust the time from
winter to summer time and vice versa
(see section on "Altering oven settings").
To remove the time of day from the
display
display
The time of day display can be
switched off to save energy.
Press buttons "f" and ")"
together twice in succession.
together twice in succession.
The time of day continues to run un-
seen.
seen.
If a process has been pre-
programmed, the time of day dis-
play cannot be switched off.
programmed, the time of day dis-
play cannot be switched off.
To bring back the visible time display
Press buttons "f" and ")"
together once.
together once.
Timer - use
33