Alto-Shaam rotisserie electric with ventless hood Manuale Utente
S E R V I C E
MN-28907 (Rev 0) • AR-7EVH Electric Rotisserie with Ventless Hood Operation & Care Manual • 31
Part numbers and drawings are subject to change without notice.
R O T I S S E R I E , B U L B R E P L A C E M E N T I N S T R U C T I O N S
To Replace Bulbs:
A. Remove four screws holding glass light
cover (CV-26607) and gasket (GS-26609)
in place, taking care to not let the glass
cover (GL-26608) fall into the oven.
in place, taking care to not let the glass
cover (GL-26608) fall into the oven.
B. Pull bulb out.
C. Push replacement bulb (LP-34213) in place.
D. Re-install glass cover and gasket, securing
C. Push replacement bulb (LP-34213) in place.
D. Re-install glass cover and gasket, securing
with four screws removed in step one.
A
B & C
D
C A U T I O N
The performance of this unit has
been optimized using the factory
provided bulbs. These bulbs should
be replaced with an exact replacement
or with a factory recommended
replacement. These bulbs have been
treated to resist breakage and must be
replaced with similarly treated bulbs in
order to maintain compliance with NSF
standards. DO NOT over-tighten bulbs
in their receptacles as this can cause
damage to the bulb fi lament.
been optimized using the factory
provided bulbs. These bulbs should
be replaced with an exact replacement
or with a factory recommended
replacement. These bulbs have been
treated to resist breakage and must be
replaced with similarly treated bulbs in
order to maintain compliance with NSF
standards. DO NOT over-tighten bulbs
in their receptacles as this can cause
damage to the bulb fi lament.
C A U T I O N
DO NOT HANDLE NEW BULB WITH
BARE HANDS. WHITE COTTON
GLOVES SHOULD BE WORN WHEN
REPLACING BULBS.
BARE HANDS. WHITE COTTON
GLOVES SHOULD BE WORN WHEN
REPLACING BULBS.