Honeywell T7047G Manuale Utente

62-3050—3

The T7047C,G Electronic Thermostats and Remote 
Space Sensors are used in Series 70 Control Systems 
to provide modulating space temperature control.

Models:
T7047C: 2-wire remote sensor for use with control 

systems such as the T7100, T7300, W927, W960, 
and W973.

T7047G: 2-wire remote sensor without internal 

adjustment means, requires remote setpoint device 
such as T7100, T7300, S963B, 7067B or T7080B.

Dimensions: See Fig. 1.

Temperature Sensor: Thermistor-resistor element.

Sensor Resistance:
For the following negative temperature coefficient (NTC) 

devices, resistance decreases as temperature 
increases (Fig. 8 and 9):
T7047C: 1420 ohms nominal at 75°F (24°C); 

resistance changes 15 ohms for each 1°F (0.6°C) 
temperature change.

T7047G: 710 ohms nominal at 75°F (24°C); 

resistance changes 7.5 ohms for each 1°F (0.6°C) 
temperature change.

Mounting: Mounts on wall or 2 x 4 in. vertical outlet box 

with screws provided.

Accessories:
209649A Universal Cover Plate (taupe); 

5-3/4 x 7-3/8 in. (146 x 187 mm).

209650A Universal Cover Plate (premier white); 

5-3/4 x 7-3/8 in. (146 x 187 mm).

1. Read these instructions carefully. Failure to follow 

them could damage the product or cause a 
hazardous condition.

2. Check the ratings given in the instructions and on 

the product to make sure the product is suitable for 
your application.

3. Installer must be a trained, experienced service 

technician.

4. After installation is complete, check out product 

operation as provided in these instructions.

Electrical Shock or Equipment 
Damage Hazard.
Can shock individuals or short equipment 
circuitry.
Disconnect power supply before installation.

3-1/4

(83)

3-13/16

(97)

4-5/8

(117)

1-13/16 (46)

3-5/8 (92)

7/8 (22)

1-1/16 (27)

2-7/8 (73)

3/8

(10)

M17720