Radio Shack HTX-200 Manuale Utente

23

To turn on the HTX-200, rotate 

 clockwise until it clicks.

The HTX-200 sounds a brief melody if the key tone feature is en-
abled. Then 

 appears for about 2 seconds and the last

used frequency appears.

You tune to the desired frequencies in the VFO (variable frequen-
cy oscillator) mode. You can either step to a specific frequency or
directly select the frequency.

To step to a frequency, repeatedly press or hold down

 or 

until the display shows the desired frequency.

Note: The HTX-200 steps up or down in increments which you
set using the Frequency Step menu option. (See “Setting the Fre-
quency Step” on Page 39).

To directly enter a frequency, press 

+

 (the second digit

from the left flashes), then press 

 or 

 to change the number.

Press 

+

 again to select the next digit. Repeat this to select

each number of the desired frequency, then press 

 to store

the selection.

Note: The HTX-200 is preset to receive frequencies between 136
and 174 MHz, and transmit between 144 to 148 MHz. To expand
the frequency coverage, see “Changing the Transmit Frequency
Range” on Page 38.

19-1102RPO.fm  Page 23  Friday, June 25, 1999  11:17 AM