Lightolier PPH Dépliant
Lightolier
45 INDUSTRIAL WAY, WILMINGTON, MA 01887
PARAPLUS (PPH), COFFAIRE (CFH) AND MINI-BEAM (MBS) INSTALLATION INSTRUCTIONS
1
© Lightolier 2004
59-31115-001
Printed in U.S.A.
IMPORTANT: For Paraplus remove Louver
before installing fixture into ceiling system.
To remove Louver, shift Louver to begin open-
ing for removal. Depress Louver as shown and
pull Louver towards you to clear Hinge Pin.
Rotate Louver up and remove.
To replace Louver (when installation is com-
plete) reverse the procedure.
before installing fixture into ceiling system.
To remove Louver, shift Louver to begin open-
ing for removal. Depress Louver as shown and
pull Louver towards you to clear Hinge Pin.
Rotate Louver up and remove.
To replace Louver (when installation is com-
plete) reverse the procedure.
For Coffaire (CFH) and Mini-Beam (MBS)
Lamp Shield does not have to be removed
before installing fixture into ceiling system.
See step 3.
Lamp Shield does not have to be removed
before installing fixture into ceiling system.
See step 3.
To remove Access Plate, remove Screw and
slide Access Place in the direction of arrow 1.
Bend Housing Tab up to attach ground screw to
green screw on Housing Tab. Then bend
slide Access Place in the direction of arrow 1.
Bend Housing Tab up to attach ground screw to
green screw on Housing Tab. Then bend
2
Housing
Hinge
Hinge
Pin
Pin
Louver
Hinge
Hinge
Pin
Pin
Housing
Louver
Housing
Hinge
Pin
Pin
Louver
Housing
Access
Plate
Plate
Screw
Housing
Housing Tab
2
1
Housing Tab down into Housing as shown.
Install Access Plate by sliding Access Plate in
the direction of arrow 2. Secure with Screw.
Install Access Plate by sliding Access Plate in
the direction of arrow 2. Secure with Screw.