Drolet 2000 Manuale Utente

 

 

 

Figure 1: SIBERIAN-1200 and 1600 

Pedestal Installation : 

1.  Remove all bricks and insulations in 

the appliance. 

2.  Slowly, lay down the stove on his 

back.   

3.  Install legs or the pedestal with the 

supplied nuts and bolts.  Stand up 
the stove and place it with the 
required clearances.  Note that 
there is eight holes in the bottom of 
the stove but only four will align with 
the pedestal. 

4.  Slide the front part of the pedestal 

base around the pedestal and fix 
the rear part with the two supplied 
screws. 

5.  Slide the ash pan in position (for 

Deluxe model only). 

Figure 2: SIBERIAN-2000 

 
Side Panels Installation : 
 

1.  Fix the front part of the decorative 

side with two screws supplied.  The  
oblong holes allow to adjust the 
height of the side 3\16" (5 mm) 
above the top of the stove. 

2.  Then, fix the back on the decorative 

side with three screws and washers 
supplied.  Line up the decorative 
side in relation to the side of the 
appliance. 

 

 

 

4