England's Stove Works 55-SHPEP Manuale Utente

Page | 27  

 

Baffle Removal 

•  Using the integral tube cleaner, as mentioned in the Daily Maintenance 

section, helps to keep the heat exchanger tubes free from fly ash; however, 
fly ash will still accumulate on the baffle shelf and in other non-visible 
areas. 

•  The firebox baffle is a free floating design, which reduces thermal stresses 

on the baffle and makes it easily removable for cleaning. 

•  Remove the baffle by: 

o

  Grasping the baffle lifting tab in the center of the baffle. 

o

  Tilting the baffle towards the back of the stove. 

o

  Lifting the baffle up and out of its support holes on the firebox shelf. 

o

  Allowing the baffle to slide down to the cradle and then tilting it down 

and pulling it out of the stove through the main door. 

•  When the baffle is out of the stove, the area where fly-ash accumulates on 

the firebox shelf will be clear. 

•  The use of a utility vacuum is highly recommended because it will prevent 

fly-ash from falling through the exhaust holes and into the exhaust chamber. 

•  BEFORE replacing the baffle into the stove, inspect the heat exchange 

tubes for fly ash accumulation and, if necessary, use a wire brush to remove 
the ash accumulation. 

•  After removing all fly-ash from behind the baffle, reinsert the baffle into the 

stove, using the reverse of the process detailed above.  The fit of the baffle 
into the stove is intentionally tight; however, excessive force is not 
necessary to replace the baffle.  If it seems the baffle will not fit without 
using excessive force, remove the baffle from the firebox and line it up again 
before trying to fit it back into the firebox.