England's Stove Works 55-SHPEP Manuale Utente

Page | 6 
 

 
Installation Overview 

When choosing a location for your new stove, there are a multitude of 

factors that should be taken into account before beginning the installation. 
 

1.  Traffic Patterns – To help prevent accidents, the stove should be placed 

in a location where it is out of the way of normal travel through the 
home. 

 
2.  Heat Flow – When deciding on a location for the stove, consider the way 

heat moves throughout your home.  Install the stove where you need the 
heat; basement installations often do not allow sufficient heat to flow to 
the upper floors and a top floor installation will not allow any heat to 
reach the floors below.  Always consider that heat rises and will take the 
path of least resistance while it is still hot. 

 
3.  Exhaust Location – Outside walls are generally the best place to install a 

stove, since they allow easy exhaust and intake air installation (using our 
Simpson DuraVent AC-3000 Kit).  If there is not a feasible way to install 
the stove on an outside wall, there are methods for venting the stove up 
through the roof, but they tend to be more costly because they involve the 
use of more pellet vent pipe and can often make outside air installation 
more difficult. 

 

4.  Wall Construction – Locating the stove so that the exhaust system can 

pass between studs will simplify the installation and eliminate the need to 
reframe any sections of the wall to accommodate the wall thimble. 

 

• 

WARNING 

•  Do not store or use gasoline or other flammable vapors and liquids in the 

vicinity of this or any other appliance. 

•  Do Not Overfire – If any external part starts to glow, you are overfiring.  

Reduce feed rate.  Overfiring will void your warranty. 

•  Comply with all minimum clearances to combustibles as specified.  

Failure to comply may result in a house fire. 

•  Tested and approved for wood pellets only.  Burning any other fuel will 

void your warranty.