Panasonic SC-NA30/SC-NA10 Manuale Utente

VQ

T5

C5

1

You can change the transmission speed to prioritise sound quality or connectivity.

• The default setting is “Emphasis on sound quality”. When the sound is interrupted, select 

“Emphasis on connectivity”.

A beep sound is emitted once, and the Bluetooth

®

 indicator (blue) and the LP mode 

indicator (green) flash once.

A beep sound is emitted twice, and the Bluetooth

®

 indicator (blue) and the LP mode 

indicator (green) flash twice.

• Press [LP], and within 2 seconds, press [

]. If [

] is pressed after this time limit, the LP 

mode setting will be changed.

• Turn off this unit or the device.
• Stop / disable the Bluetooth

®

 transmission of the device.

• (For NFC-compatible devices only)

Touch and hold your device to NFC touch area of this unit again.

• This unit can only be connected to one device at a time.
• This unit can register up to 8 devices. 

When the number of registered devices exceeds the maximum limit, a device that has not 
made a Bluetooth

®

 connection for the longest time will be replaced. This will cancel the 

registration of the device. To use the device again, re-register it.

• If the unit connected to the AC adaptor is selected from a Bluetooth

®

 device, the unit will turn 

on automatically even when it is turned off, establishing a Bluetooth

®

 connection.

• If the image and sound are out of sync during playback, restart the playback app you are 

using. If the problem persists, connect the Bluetooth

®

 device and this unit with an audio cable 

(commercially-available).

• The One-Touch Connection may not work properly depending on the type of device being 

used.

• Depending on the specifications and settings of a device, it can fail to connect or some 

operations can be different.

• Refer to the operating instructions of the Bluetooth

®

 device for details.

SC-NA30_10EB_VQT5C39_eng.book  12 ページ  ２０１３年８月７日　水曜日　午前１１時４６分