Panasonic SC-NA30/SC-NA10 Manuale Utente

Pagina di 24
VQ
T5
C5
1
9
Note
• Do not use any other AC adaptors except the supplied one.
• When this unit is not used over a long period of time, charge the built-in battery at least once 
every six months to prevent it from deteriorating.
• Charging may not start if the battery level is sufficiently high even if it is not full.
• It is recommended to charge the battery in the temperature of between 10 oC and 35 oC. The 
Battery indicator (red) may flash and charging may not be possible when it is out of 
recommended temperature range.
• The battery may not charge when the temperature surrounding the battery is high during the 
operation or right after the operation even when it is within the recommended temperature 
range. In such case, stop the usage and let it cool down.
• To ensure safety, in the case of an excessive input signal, the system may be automatically 
interrupted and power is turned off.
• Use of the DC OUT terminal will reduce the operating time.
The DC OUT terminal of this unit is for supplying/charging power to a connected 
device (rated value: 5 V/1 A). Note that the port cannot be used for purposes other 
than supplying/charging power.
Note that when the unit is turned off, charging is not possible.
Preparation
Turn on the unit.
1
Using a USB cable 
(commercially-available), 
connect the unit and a 
compatible device.
2
Once fully charged, remove 
the USB cable 
(commercially-available) 
from the DC OUT terminal.
Note
• A cable compatible with your device is required. If a cable is supplied with your device, use the cable.
• Even if you connect a cable compatible with the DC OUT terminal of this unit, your device may 
not be charged. In that case, use a charger supplied with your device.
• Depending on your device, charging methods other than the specified one may not be 
allowed. Check the operating instructions of your device before use.
• Do not connect a device with a rated value higher than 5 V/1 A to this unit. Doing so may 
cause malfunction.
• To check if charging is complete, look at the screen of the connected device, etc.
• After charging, pull out the compatible cable.
About the DC OUT terminal (USB)
[NA30]
[NA10]
To the compatible device
USB cable 
(commercially-
available)
Rear view
SC-NA30_10EB_VQT5C39_eng.book  9 ページ  2013年8月7日 水曜日 午前11時46分