Panasonic SC-HT933 Manuale Utente

4

RQT7972

Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
≥Make sure you have all the indicated components before starting assembly, setup, and connection.
≥There is no difference between the right and left speakers and pipes.

[HT730] 

[HT733]

You can use the front speakers without assembling with the stands. In this case, attach the included 
rubber pads to the base of the speakers. This prevents vibration from causing the speakers to move 
or fall over. Use 3 or 4 pads per speaker.

1

2

Secure pipe B to the base.
Ensure the screws are securely fastened.

1

Thread the speaker cable from pipe A through pipe B and 
the base.
For quicker threading, loosely fold the cable in half (do not 
crease), pass the folded portion through the pipe, and then pull 
the rest of the cable through the base.

2

3

Secure the pipes.
Ensure the screws are securely fastened.

Slot the screw head in between the 2 stoppers of the speaker 
groove.
Ensure the pipe is fastened on straight by gradually tightening the 
right and left screws alternately until fully tightened.
To prevent a short-circuit, do not cover the connection 
terminals with the pipe.

≥2kpipe A 

(with cable)

≥2kpipe B

Match these holes when you 
insert the pipe.

Phillips-head screwdriver
(not included)