LST HT-11001 Dépliant

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED

HT-11001_DBL_LST_EN_0804.PDF • PAGE 1

A

Building Safety. Building Security.

The Thermal ROR Detector HT-11001 reacts to tempe-

rature changes within defi ned periods of time, up to a 

maximum temperature of 57°C. The intelligent evaluati-

on of these data allows the early detection of spreading 

fi res. The detector complies with Class A1R and can be 

used up to a room height of 7.5m.

Addressable conventional technology is used for alarm 

transmission  to  the  fi re  detection  control  panel.  By 

means of the optional Address Module NG60-1, each 

detector can be addressed individually, thus allowing to 

display the detector address, as well as an assigned 

element text, on a suitable fi re detection control panel.

A detector fault is indicated by a yellow fl ashing of the 

multicoloured status LED. 

The detector can be attached to various bases and it 

can be protected against theft.

Operating voltage 

Supply through the detector line voltage

Current consumption 

typ. 65µA (quiescent)

Alarm temperature  

57°C (maximum-heat component)

Operating temperature 

max. +50°C

Ambient temperature 

- 40°C to +70°C (no condensation or icing)

Relative humidity 

0 – 98% (no condensation)

Dimensions ø × H 

100 × 36 (mm)

Colour 

white

Weight 

70g

Approval 

VdS G204033

Order number 

242030

Order name 

Thermal ROR Detector/Conv./ORBIS/Apo HT-11001