Silverstone SST-ML01B-R Manuale Utente
7
8
5
6
Installation Guide
Take out two pieces of M3*4 screws, and secure the external 3.5"device as pictured.
Take out the external 3.5"drive bay cover from the front panel.
From the accessory packet, take out two pieces of M3*4
screws and screw the optical drive into place as pictured.
If optical drive cover on the front panel touches the optical
drive and prevents the front panel from installing properly,
use pre-drilled hole B to secure the optical drive instead,
then use of a rubber filler is then required as pictured.
screws and screw the optical drive into place as pictured.
If optical drive cover on the front panel touches the optical
drive and prevents the front panel from installing properly,
use pre-drilled hole B to secure the optical drive instead,
then use of a rubber filler is then required as pictured.
Take out a thumb screw from the accessory packet
and secure the optical drive into place as pictured.
and secure the optical drive into place as pictured.
Plastic
thumb screw
thumb screw