Philips BDL4677XL/00 Manuale Utente
BDL4677XL
13
3.2. Connecting Remote Control
3.2.1. Single Display Control
To control one display, connect the “IR Sensor Cable” to the [IR IN]
port.
Point the top of the remote control toward the “IR Sensor Cable” when
Point the top of the remote control toward the “IR Sensor Cable” when
pressing a button.
NOTE: The Display’s remote control sensor will stop working after
NOTE: The Display’s remote control sensor will stop working after
connected with the “IR Sensor Cable”.
IR Sensor Cable
POWER
SMART
VIDEO
SOURCE
PIP
INPUT
ON/OFF
CHANGE
BRIGHTNESS
CONTRAST
DISPLAY
AUTO
ADJUST
MUTE
VOL UP
VOL DOWN
EXIT
MENU
SET
AUDIO
SOURCE
USB MENU
IR IN
IR OUT
3.2.2. IR Pass Through Control
To control a Video-Wall set up by multiple displays, use the”IR Sensor
Cable” and the”IR Cable” to achieve the function.
IR Sensor Cable
IR input port of the DVD player
Display
IR IN
IR OUT
IR Cable
Remote control of DVD player
DVD Player
1. Connect the “IR Sensor Cable” to the [IR IN] port of the display.
2. Connect with the”IR Cable” from the [IR OUT] port of the display
2. Connect with the”IR Cable” from the [IR OUT] port of the display
to the IR input port of the DVD player.
3. IR signal will be passed to DVD player when pressing a button.
NOTE: The remote control may not function properly if the “IR
NOTE: The remote control may not function properly if the “IR
Sensor Cable” is under direct sunlight or strong illumination, or when
there is obstacle in the path of signal transmission.