Cisco 48 Ethernet 10/100 ports + PoE & 4 SFP Gigabit Ethernet ports WS-C3560V2-48PS-S Scheda Tecnica

Codici prodotto

WS-C3560V2-48PS-S

Data Sheet

Page 4 of 20

●

DHCP AutoInstall simplifies the deployment of a large number of switches by automatically downloading a

specified Cisco IOS Software image and a configuration file from a TFTP server. This feature can be used to

implement a “zero touch deployment”.

●

DHCP Port Based Allocation allows you to allocate the same IP address for a specified port. The feature

allows persistent allocation of IP addresses to specified network devices.

●

Embedded Event Manager (EEM) is a powerful and flexible tool for management and automation. This

feature can be used to monitor network events and program automatic actions based on these network

events. Policies can be defined via CLI or Tcl script and can be used in a variety of scenarios, such as

automatically backing up a configuration file at a specified time or triggering an alert when traffic congestion

crosses a specified threshold. EEM requires the IP Services license.

●

Configuration Replace and Rollback simplifies configuration management by allowing you to rollback

configuration changes. This feature allows you to replace a configuration file with a saved configuration file

without a switch reload, and up to 14 configuration files can be saved.

●

Automatic QoS (Auto QoS) simplifies QoS configuration in voice-over-IP (VoIP) networks by issuing interface

and global switch commands to detect Cisco IP phones, classify traffic, and enable egress queue

configuration.

●

Autosensing on each 10/100 port detects the speed of the attached device and automatically configures the

port for 10- or 100-Mbps operation, easing switch deployment in mixed 10- and 100-Mbps environments.

●

Autonegotiating on all ports automatically selects half- or full-duplex transmission mode to optimize

bandwidth.

●

Dynamic Trunking Protocol (DTP) helps enable dynamic trunk configuration across all switch ports.

●

Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel

groups or Gigabit

EtherChannel groups to link to another switch, router, or server.

●

Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that

conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.

●

DHCP Server enables a convenient deployment option for the assignment of IP addresses in networks that

do not have a dedicated DHCP server.

●

DHCP Relay allows a DHCP relay agent to broadcast DHCP requests to the network DHCP server.

●

IEEE 802.3z-compliant 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-T, and coarse

wavelength-division multiplexing (CWDM) physical interface support through a field-replaceable SFP module

provides unprecedented flexibility in switch deployment.

●

Support for the Cisco Catalyst 3560 SFP Interconnect Cable facilitates a low-cost, point-to-point gigabit

connection between Cisco Catalyst 3560 v2 Series switches.

●

The default configuration stored in Flash memory helps ensure that the switch can be quickly connected to

the network and can pass traffic with minimal user intervention.

●

Automatic medium-dependent interface crossover (Auto-MDIX) automatically adjusts transmit and receive

pairs if an incorrect cable type (crossover or straight-through) is installed on a 10/100 port.

●

Time Domain Reflectometry (TDR) to diagnose and resolve cabling problems on copper Ethernet ports.

Enhanced Security

With the wide range of security features, such as ACLs, authentication, port-level security, and identity based

network services (IBNS) with 802.1x and extensions, that the Cisco Catalyst 3560 v2 Series offers, businesses can

protect important information, keep unauthorized people off the network, guard privacy, and maintain uninterrupted

operation. These security features include: