Philips LFF6020W/GBB Manuale Utente

- 16 -

1 Make sure that the On/Off switch is on Off 

(O position). 

2 Connect the power cord to the device. 

 

Plug the power cord to outlet on the wall. 

3 Press the On/Off button to turn on the device 

(I position).

After a few seconds, when the machine has warmed up, 
the Easy Install function is launched and the LCD screen 
displays the following message:

The Easy Install function will help you configure your 
machine by guiding you through the basic settings.

If you wish to modify the setting displayed, press the OK 
button. If you do not want to modify the displayed setting, 
press the C button: the Easy Install function then 
displays the next basic setting.

1 Select the desired language using the   or   

buttons and confirm with OK.

The setup is now complete and the functions list is 
automatically printed out.

The LCD screen displays the message P

 if no 

paper has been loaded in the paper tray (see Loading 
paper in the main unit tray, page 10). Once paper has 
been loaded, printing will resume.

The manual input tray allows you to use various paper 
formats with greater grammage than the one used in the 
paper feed cassette (refer to the paragraph 
Specifications, page 49).

Only one sheet or envelope can be fed at a time.

1 Spread the manual feed guides to the maximum.

2 Insert a sheet or an envelope in the manual input 

tray.

3 Adjust the paper guides against the right and left 

edges of the sheet or the envelope.

4 Print making sure that the chosen paper format 

corresponds to the selected format on the printer 
(refer to Copy, page 18).

• Feeding can be done only through the manual feed.
• Recommended area should be the area which 

excludes 15 mm from the leading edge, 10 mm from 
both the left and right edges, and the rear edge.

• A few lines may be given in solid print at the part of 

being overlapped.

• Envelopes which are not recommended may lead to 

improper printing (refer to the paragraph 
Specifications, page 49).

• Curled envelope after printing should be fixed 

manually.

• Small crumples on the edge of the wide side of 

envelopes, smearing, or less clear printing may 

Before plugging the power cord, it 
is imperative to refer to the 
Security directives, page 1.

To manually modify and customise the 
machine settings, refer to 
Parameters/Setup, page 22.

Before inserting paper, refer to the 
paragraph Paper 
recommendations, page 10.