Philips LFF6020W/GBB Manuale Utente

- 38 -

5 Select L

ASER

 P

RO

 LL2 in the list and click on N

.

6 A screen informs you that the drivers have been 

installed. Click on the C

 button.

You can now use the multifunction machine to print or 
scan your documents.

Make sure that your multifunction machine is powered off. 
The connection between the PC and the machine 
requires a USB 2.0 shielded cable no more than 3 meters 
long.

1 Locate your USB cable connectors and connect as 

shown below on the picture.

2 Power on your multifunction machine.

 

The PC detects the device and  the drivers are 
automatically installed.

3 Once the installation is finished, a message 

indicates that the drivers are installed correctly.

You can now use the multifunction machine to print or 
scan your documents.

It is recommended to install the 
Companion Suite Pro software first 
and then to connect the USB cable 
to your machine (see Installing the 
full software package, page 34).

If you connect the USB cable before 
installing the Companion Suite Pro 
software the recognition system 
(plug and play) identifies 
automatically that new hardware has 
been added. To start your machine 
drivers installation, refer to 
paragraph Installing the drivers 
manually, page 37 and follow the 
instructions on screen. When you 
use this procedure, only printing and 
scanning functions are activated.