Philips LFF6020W/GBB Manuale Utente

Pagina di 56
LFF6020
- 47 -
9 - Maintenance
Paper jam
When printing, a sheet of paper may get stuck in the 
printer or the paper tray and cause a paper jam.
In case of a paper jam in the machine, the following 
message appears:
Open the paper jam cover located at the back of 
the machine. 
Remove the jammed sheet of paper and close the 
cover. 
Open and close the front cover.
 
The printer starts again automatically.
In case of paper jam, the following message appears: 
Remove the toner cartridge and check if a sheet is 
jammed.
Remove the sheet of paper which causes the paper 
jam.
Put the toner cartridge in the machine, or remove 
the paper tray and remove the sheet of paper which 
causes the paper jam.
Check that the paper sheets in the paper tray are 
correctly placed.
Replace the paper tray in the machine.
PC printing issues
This section details how the machine handles a print 
request after having encountered an issue (paper jam, 
connection loss, etc.).
Refer to the sections below to know if the printing of your 
document will resume or will be cancelled, depending on:
• the connection to the PC,
• the problem encountered during printing.
PC printing via USB connection
PAPER JAM
EXTERNAL TRAY
CAUTION
The fusion unit can reach a very 
high temperature during the 
operation. To prevent any harm, do 
not touch this area. For details, 
refer to 
Positions of Safety labels 
on the machine
, page 3
.
PAPER JAM
REMOVE TONER
Issue encountered
Print request handling
Paper empty
Once the problem is resolved, 
printing resumes from the first 
non-printed page.
No paper feed
Once the problem is resolved, 
printing resumes from the first 
non-printed page.
Exception: If the document 
was to be printed in manual 
duplex mode, the printing of 
the document is cancelled.
Paper jam
Paper format problem
Toner empty
The printing of the active 
document is cancelled. 
Documents waiting to be 
printed, however, will print 
after the toner cartridge is 
replaced.
Pause requested 
from the spooler
The machine switches to idle 
mode after a timeout (30 
seconds by default).
 
The printing of the active 
document is cancelled. 
Documents waiting to be 
printed, however, will be 
printed.
Loss of USB 
connection
Once the problem is resolved, 
the printing of the document 
restarts from the beginning, 
regardless of the number of 
pages already printed before 
the connection loss.