Philips DVP5980/12 Manuale Utente

52

–  The USB fl ash drive format is not compatible with the 

DVD player.

–  Drive is formatted with a different fi le system. (e.g. 

NTFS)

–  Big fi le size or high solution USB fl ash driver takes longer 

time to read and display on the TV screen.

–  HDMI connection can only be made to HDMI-equipped 

devices with HDCP (High Bandwidth Digital Content 
Protection).  Use a separate adaptor (DVI to HDMI) for 
DVI TV connection (equipped with HDCP).

–  Make sure the resolution of this DVD player matches the 

TV device you have connected using the HDMI; 
480p/576p/720p/1080i/1080p and this DVD player 
supports 1080p at 50/60Hz only.

–  When connecting to a non-HDCP complaint TV, the 

HDCP warning message will appear.

–  When the HDMI and RGB video connection are used at 

the same time, there will be no picture output from the 
RGB video connection, disconnect the HDMI cable.

–  Press HD UPSCALE if no picture on the TV screen after 

power off and on.

–  Check the connection between the TV and HDMI of 

DVD player.

–  During resolution selection for DVI TV, a distorted or 

black screen may appear, see HDMI Video Setup.

–  There will be no sound from the HDMI output if the 

source device is only DVI/HDCP (High Bandwidth Digital 
Content Protection)- compatible.

–  It is not possible to output SACD or copy-controlled 

DVD audio sources from the HDMI connection.

1_dvp5980MKll_12_eng 2.indd   52

1_dvp5980MKll_12_eng 2.indd   52

2007-08-22   10:55:51 AM

2007-08-22   10:55:51 AM