Acronis Backup & Recovery 10 Adv WS TIDLBPDES Manuale Utente
Codici prodotto
TIDLBPDES
Linux-based bootable media
Linux-based media contains Acronis Backup & Recovery 10 Bootable Agent based on Linux kernel. The
agent can boot and perform operations on any PC-compatible hardware, including bare metal and
machines with corrupted or non-supported file systems. The operations can be configured and
controlled either locally or remotely using the management console.
agent can boot and perform operations on any PC-compatible hardware, including bare metal and
machines with corrupted or non-supported file systems. The operations can be configured and
controlled either locally or remotely using the management console.
PE-based bootable media
PE-based bootable media contains a minimal Windows system called Windows Preinstallation
Environment (WinPE) and Acronis Plug-in for WinPE, that is, a modification of Acronis Backup &
Recovery 10 Agent that can run in the preinstallation environment.
Environment (WinPE) and Acronis Plug-in for WinPE, that is, a modification of Acronis Backup &
Recovery 10 Agent that can run in the preinstallation environment.
WinPE proved to be the most convenient bootable solution in large environments with
heterogeneous hardware.
heterogeneous hardware.
Advantages:
•
Using Acronis Backup & Recovery 10 in Windows Preinstallation Environment provides more
functionality than using Linux-based bootable media. Having booted PC-compatible hardware
into WinPE, you can use not only Acronis Backup & Recovery 10 Agent, but also PE commands
and scripts and other plug-ins you've added to the PE.
functionality than using Linux-based bootable media. Having booted PC-compatible hardware
into WinPE, you can use not only Acronis Backup & Recovery 10 Agent, but also PE commands
and scripts and other plug-ins you've added to the PE.
•
PE-based bootable media helps overcome some Linux-related bootable media issues such as
support for certain RAID controllers or certain levels of RAID arrays only. Media based on PE 2.x,
that is, Windows Vista or Windows Server 2008 kernel, allows for dynamic loading of the
necessary device drivers.
support for certain RAID controllers or certain levels of RAID arrays only. Media based on PE 2.x,
that is, Windows Vista or Windows Server 2008 kernel, allows for dynamic loading of the
necessary device drivers.
6.8.1. How to create bootable media
Linux-based bootable media
To create Linux-based bootable media, prepare a blank disk, install Acronis PXE Server or set up
WDS/RIS. Then start the Bootable Media Builder by selecting Tools > Create Bootable Rescue Media.
The wizard will guide you through the necessary operations. Please refer to Bootable Media Builder
(p. 244) for details.
WDS/RIS. Then start the Bootable Media Builder by selecting Tools > Create Bootable Rescue Media.
The wizard will guide you through the necessary operations. Please refer to Bootable Media Builder
(p. 244) for details.
PE-based bootable media
Acronis Plug-in for WinPE can be added to WinPE distributions based on any of the following kernels:
•
Windows XP Professional with Service Pack 2 (PE 1.5)
•
Windows Server 2003 with Service Pack 1 (PE 1.6)
•
Windows Vista (PE 2.0)
•
Windows Vista SP1 and Windows Server 2008 (PE 2.1)
If you already have media with PE1.x distribution, unpack the media ISO to a local folder and start the
Acronis WinPE ISO Builder by selecting it from start menu -> Acronis. The wizard will guide you
through the necessary operations. Please refer to Adding the Acronis Plug-in to WinPE 1.x (p. 247) for
details.
Acronis WinPE ISO Builder by selecting it from start menu -> Acronis. The wizard will guide you
through the necessary operations. Please refer to Adding the Acronis Plug-in to WinPE 1.x (p. 247) for
details.
Copyright © Acronis, Inc., 2000-2009
243