Acronis Backup & Recovery 10 Adv WS TIDLBPDES Manuale Utente

Codici prodotto

TIDLBPDES

6.8.2. Connecting to a machine booted from media

Once a machine boots from bootable media, the machine terminal displays a startup window with
the IP address(es) obtained from DHCP or set according to the pre-configured values.

Remote connection

To connect to the machine remotely, select Connect -> Manage a remote machine in the console
menu and specify one of the machine's IP addresses. Provide the user name and password if
these have been configured when creating the bootable media.

Local connection

Acronis Backup & Recovery 10 Management Console is always present on the bootable media.
Anyone who has physical access to the machine terminal can run the console and connect. Just
click Run management console in the bootable agent startup window.

6.8.3. Working under bootable media

Operations on a machine booted with bootable media are very similar to backup and recovery under
the operating system. The difference is as follows:

1. Disk letters seen under Windows-style bootable media might differ from the way Windows

identifies drives. For example, the D: drive under the rescue utility might correspond to the E:
drive in Windows.

Be careful! To be on the safe side, it is advisable to assign unique names to the volumes.

2. The Linux-style bootable media shows local disks and volumes as unmounted (sda1, sda2...).

3. There is no Navigation tree in the media GUI. Use the Navigation menu item to navigate

between views.

4. Tasks cannot be scheduled; in fact, tasks are not created at all. If you need to repeat the

operation, configure it from scratch.

5. The log lifetime is limited to the current session. You can save the entire log or the filtered log

entries to a file.

6. Centralized vaults are not displayed in the folder tree of the Archive window.

To access a managed vault, type the following string in the Path field:
bsp://node_address/vault_name/
To access an unmanaged centralized vault, type the full path to the vault's folder.
After entering access credentials, you will see a list of archives located in the vault.

6.8.4. List of commands and utilities available in Linux-based

bootable media

Linux-based bootable media contains the following commands and command line utilities, which you
can use when running a command shell. To start the command shell, press CTRL+ALT+F2 while in the
bootable media's management console.

250