Acronis Backup & Recovery 10 Adv WS TIDLBPDES Manuale Utente

Codici prodotto

TIDLBPDES

following option).

Enabled

Encryption is enabled. In Encryption, select one of the following:

Enabled

Data transfer will be encrypted if encryption is enabled on the client application, otherwise it
will be unencrypted.

Disabled

Encryption is disabled; any connection to a client application which requires encryption will
not be established.

Required

Data transfer will be performed only if encryption is enabled on the client application (see
"Client Encryption options"); it will be encrypted.

Authentication parameters

In Use Agent Certificate Authentication, select one of the following:

Do not use

The use of SSL certificates is disabled. Any connection to a client application which requires
the use of SSL certificates will not be established.

Use if possible

The use of SSL certificates is enabled. The server will use SSL certificates if their use is enabled
on the client application, and will not use them otherwise.

Always use

The use of SSL certificates is enabled. The connection will be established only if the use of SSL
certificates is enabled on the client application.

Disabled

The same as Not configured.

2.11.8.4. Network port configuration

Acronis Backup & Recovery 10 components use the 9876/TCP network communication port by
default. The server listens to this port for incoming connection. This port is also used as default by the
Acronis client. During component installation you might be asked to confirm the port opening or to
open the port manually, in case you are using a firewall other than Windows Firewall.

After installation, you can change the ports at any time to match your preferable values or for the
purpose of security. This operation requires the restart of Acronis Remote Agent (in Windows) or the
Acronis_agent (in Linux) service.

After the port is changed on the server side, connect to the server using the <Server-IP>:<port> or the
<Server-hostname>:<port> URL notation.

Note: If you use network address translation (NAT), you can also configure the port by setting up port mapping.