Acronis Backup & Recovery 10 Adv WS TIDLBPDES Manuale Utente

Codici prodotto

TIDLBPDES

<------------------------------ Backup ---------------------------->

Pre-backup

command

Pre-data

capture

command

Data

capture

Post-data

capture

command

Post-backup

command

If the Volume Shadow Copy Service (p. 97) option is enabled, the commands' execution and the
Microsoft VSS actions will be sequenced as follows:

"Before data capture” commands -> VSS Suspend -> Data capture -> VSS Resume -> "After data
capture" commands.

Using the pre/post data capture commands, you can suspend and resume a database or application
that is not compatible with VSS. As opposed to the Pre/Post commands (p. 93), the pre/post data
capture commands will be executed before and after the data capture process, which takes seconds,
while the entire backup procedure may take much longer, depending on the amount of data to be
backed up. Therefore, the database or application idle time will be minimal.

To specify pre/post data capture commands

1. Enable pre/post data capture commands execution by checking the following options:

Execute before the data capture

Execute after the data capture

2. Do any of the following:

Click Edit to specify a new command or a batch file

Select the existing command or the batch file from the drop-down list

3. Click OK.

Pre-data capture command

To specify a command/batch file to be executed before data capture

1. In the Command field, type a command or browse to a batch file. The program does not support

interactive commands, i.e. commands that require user input (for example, "pause".)

2. In the Working directory field, specify a path to a directory where the command/batch file will be

executed.

3. In the Arguments field specify the command’s execution arguments, if required.

4. Depending on the result you want to obtain, select the appropriate options as described in the

table below.

5. Click Test command to check if the command is correct.

Check box

Selection

Fail the backup task if the
command execution fails

Selected Cleared

Do not perform the data
capture until the command

Selected Selected

Cleared Cleared