Philips SW700M/05 Manuale Utente

English

Press the WPS button on your home

Wi-Fi router.

Wait until successful connection of the

speaker to your home Wi-Fi network.

The speaker beeps.

The Wi-Fi status indicator on the WPS

button turns off.

The system status indicator on the

front panel turns solid green.

Tip

•

Only WPA and WPA2 are supported. If the wireless

security is WEP or no security is applied, the WPS

method does not work.

•

For some Wi-Fi routers, you may need to hold the

WPS button for Wi-Fi connection or enable the WPS

PBC function from the router configuration pages. See

the user manuals of the specific routers for details.

WPS

Option 4: Set up through a

PC/Mac (advanced)

Go to your Wi-Fi enabled PC/Mac.

Press and hold SETUP on the back of

SW700M for more than 3 seconds.

Both the system status indicator on

the front panel and the Wi-Fi status

indicator on the SETUP button turns

solid amber.

Select :) Philips Setup from the list of

available Wi-Fi networks on your PC/Mac.

After successful connection, open a web

browser on your PC/Mac.

Enter http://philips.speakers or 172.24.0.1

at the address bar and click the Enter key.

Make changes on the setup page and

confirm your settings.

The speaker beeps.

The Wi-Fi status indicator on the

SETUP button turns off.

The system status indicator on the

front panel turns solid green.