Philips Streamium Wireless Multimedia Adapter SL300I Manuale Utente
ENGLISH
25
Problem Possible
cause
Solution
The SL300i does not respond to any of the
Internal error.
Unplug the mains and wait at least 10 seconds
buttons including the standby button.
before reconnecting it.
The SL300i switches to standby with the
The SL300i has a thermal shutdown
Disconnect the mains, let the set cool down, improve
Power-LED flashing on and off.
that shuts down the set when
ventilation, and reconnect the set to the mains.
the internal temperature
(If the problem persists, return the set to your dealer.)
exceeds a certain threshold.
6.2 PC / Network problems
Check the Support section on www.philips.com/streamium for the latest information on
problem solving.
problem solving.
Problem Possible
cause
Solution
The Installation CD will not start.
Autorun disabled for your drive.
Double-click ‘My Computer’, then the CD-ROM
drive icon and finally ‘Setup.exe’ to start the CD.
drive icon and finally ‘Setup.exe’ to start the CD.
The software will not install.
Wrong operating system.
Go to www.philips.com/streamium to see which
operating systems are supported.
operating systems are supported.
No wireless connection or intermittent drop-out
Wireless signal range, speed, and
Switch off wireless devices that interfere with your
of the wireless connection.
strength can be affected by
wireless network connection.
interference from neighbouring
wireless networks and devices.
Electro-magnetic devices such as
televisions, radios, microwave ovens,
and cordless telephones, especially
those with frequencies in the
2.4 GHz range, may also interfere
with wireless transmission.
wireless networks and devices.
Electro-magnetic devices such as
televisions, radios, microwave ovens,
and cordless telephones, especially
those with frequencies in the
2.4 GHz range, may also interfere
with wireless transmission.
Pressing the PC LINK button produces an empty
PC is switched off.
Switch on your PC.
content screen on your television.
The Media Manager software is not
Start the Media Manager software.
running.
No wireless network adapter
Connect the wireless network adapter to your PC or
connected or range too long
reposition your Wireless adapter.You may check
(weak radio signal).
the link quality by pressing the MENU button and
selecting Network > Wireless Info > Signal Level.
selecting Network > Wireless Info > Signal Level.
Network host (PC) or wireless base
Make sure your home network is operational before you
station is switched off.
try to contact a networked computer with the SL300i.
Your Wireless Base Station/network
Add the SL300i MAC address to the list of devices that
router employs MAC filtering and
may connect to your Base Station/Gateway router. (See
prevents the SL300i from connecting its user manual for how to do this.) Press the MENU
to your network.
to your network.
button and select: Network > Wireless Info > NIC
MAC Address to see the wireless MAC address.
MAC Address to see the wireless MAC address.
Not enough USB bandwidth available If you share the USB bandwidth with other heavy
for a wireless USB adapter.
for a wireless USB adapter.
USB bandwidth users (like USB cameras, scanners or
ReWritable drives, etc.), the remaining bandwidth may
not be enough.
ReWritable drives, etc.), the remaining bandwidth may
not be enough.
Radio interference from other
Check whether a wireless connection can be
(wireless) devices.
established with other devices switched off.
(e.g. microwave ovens, other wireless devices, etc.)
(e.g. microwave ovens, other wireless devices, etc.)
(Wireless) network problems.
See advanced network problem solving on page
51-52 of the extended User Manual on CD-ROM.
51-52 of the extended User Manual on CD-ROM.