Epson EB-530 Manuale Utente

Check

Remedy

Is the volume for the computer or from the image source set to the
minimum?

Adjust the volume so that sound can be heard.

Is the Mic Input Level set at the maximum?

Lower the Mic Input Level.

s

 Settings - Mic Input Level 

Is A/V Mute active?

Press the [A/V Mute] button to cancel A/V Mute.

s

Is the audio cable's specification "No resistance"?

When using a commercially available audio cable, make sure it is labeled "No resistance".

Is it connected with an HDMI cable?

If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.

Is Output audio from the projector selected?
(Only when projecting USB Display)

Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select
the Output audio from the projector checkbox.

Is the correct audio input selected?

Check the Audio Output and HDMI Audio Output settings from the Configuration menu.

s

 Extended - A/V Settings 

Check

Remedy

Is the microphone connected correctly?

Disconnect the cable from the Microphone (Mic) input port, and then reconnect the cable.

s

Is the microphone input volume turned down too low?

Adjust the microphone input volume so that sound can be heard. 

s

 Settings - Mic Input Level 

Are you using a plug-in power type microphone?

The projector does not support plug-in power type microphones. Use a commercially available dynamic microphone.

Check

Remedy

Is the volume for the computer set to the minimum while the
projector is set to the maximum?

The audio may contain noise if the volume for the computer is set to minimum while the projector's volume is set to
maximum. Increase the volume for the computer, and decrease the volume for the projector.

s

 Settings - Volume