Hoshizaki DCM-750BWH(-OS) Manuale Supplementare

55

8)  Move the power switch to the "ON" position, then replace the panels in their correct 

positions.

9) Turn on the power supply, then move the control switch to the "ICE" position to start the 

automatic icemaking process. 

) Move the control switch to the "DRAIN" position and drain all of the water from the 

evaporator. 

) After the water has stopped draining, move the control switch to the "OFF" position, 

then turn off the power supply. Remove the front and top panels, then move the power 
switch to the "OFF" position. 

3) Remove the front cover of the storage bin. Remove spout B, then remove spout A. 

See Fig. . 

4) Remove the apron panel, then remove the left side panel. 
5) Remove the evaporator strap.
6) Remove the evaporator assembly bolts securing the evaporator assembly to the gear 

motor. Lift the evaporator assembly up slightly. See Fig. 3.

7) Disconnect the wiring from the gear motor, then remove the 

gear motor bolts. Lift the gear motor from the drain pan.

8) Place the new gear motor in the drain pan.
9) Using the gear motor bolts and washers, secure the gear 

motor. 

0) Connect the gear motor wires.
) Lower the evaporator assembly down and 

secure it to the gear motor.

) Replace the evaporator strap in its correct 

position. 

3) Replace spout A, spout B, and the front 

cover of the storage bin in their correct 
positions.

4) Move the power switch to the "ON" 

position, then replace the panels in their 
correct positions.

5) Turn on the power supply, then move the 

control switch to the "ICE" position to start 
the automatic icemaking process.

Gear Motor

Evaporator 
Assembly 
Bolts

Drain Pan

Evaporator

Gear Motor Bolts