Samsung DS 5000 Manuale Utente

You can receive internal calls in one of three modes (see Answering Intercom Calls
under Intercom Calls for descriptions):

•

While on-hook, press TRANSFER and then dial 103.

•

Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.

•

Press TRANSFER to store your selection.

Your incoming CO calls can be set to follow the intercom answer mode.

•

While on-hook, press TRANSFER and then dial 110

•

Dial 15 to access AUTO ANS CO.

•

Press the VOLUME UP or DOWN key to change status.

•

Press TRANSFER to store your selection.

NOTE: When your keyset is programmed for Auto Answer and you have Forward
No Answer (FNA) turned on, you must answer screened transfers by pressing the
SEND button before your FNA timer expires or the call will forward.

While on an outside call, pressing a line button, route button or a flashing CALL
button will automatically put your call on hold and connect you to the next call.
This feature can be turned on or off at your keyset.

•

With the handset on-hook, press TRANSFER and then dial 110.

•

Dial 001 to turn Automatic Hold on or 000 to turn it off.

•

Press TRANSFER to store your selection.

NOTE: Intercom calls can be automatically put on hold by pressing TRANSFER.

Keyset users can switch between headset mode and handset mode. When using
headset mode, press the SEND/END button to answer and release calls.

•

With the handset on-hook, press TRANSFER and then dial 110.

•

Dial 021 to use the headset or 020 to use the handset.

•

Press TRANSFER to store your selection.

39

ds_phones.qxp  5/11/2006  8:07 AM  Page 45