Tekkeon MP3450-10 Manuale Utente
14
Using the Extended Battery (MP3450-10)
You can double the capacity of myPower ALL Plus by adding the extra battery unit MP3450-10. When
MP3450-10 is added to MP3700, the battery capacity shown on the indicators includes the capacity
available with MP3450-10.
MP3450-10 is added to MP3700, the battery capacity shown on the indicators includes the capacity
available with MP3450-10.
Adding the Extended Battery
1. Place MP3700 on top of MP3450-10 with both flat silver
ends facing the same direction.
2. Connect the bracket with the 3-Pin plugs inside to the
silver ends of the devices. The 3-Pin plugs will mate with
the battery port on each of the devices, and the controls
on the end of MP3700 will show through the bracket
opening.
the battery port on each of the devices, and the controls
on the end of MP3700 will show through the bracket
opening.
3. Connect the second bracket on the opposite end of the
devices to hold the units together securely.
4. Use MP3700 as you would normally.
Charging the Extended Battery
1. With MP3450-10 connected, charge MP3700 as described earlier. Both batteries will be charged
at the same time (in parallel).