ZyXEL 2WG Guida All'Installazione Rapida
ENGLISH
3
V
If none of the LEDs are on, check your connections, and inspect your cables for damage.
Make sure that you have the power adaptor connected to the ZyWALL and plugged in to an
appropriate power source. Make sure the power source is turned on. If the LEDs are still off,
contact your local vendor.
Make sure that you have the power adaptor connected to the ZyWALL and plugged in to an
appropriate power source. Make sure the power source is turned on. If the LEDs are still off,
contact your local vendor.
2 Accessing the Web Configurator
Use this section to configure the WAN 1 interface for Internet access.
V
If the login screen does not display,
check your browser’s security settings and make sure
your computer’s Ethernet card is installed and functioning properly.
Your computer should be also set to get an IP address automatically from a DHCP server.
See Set Up Your Computer’s IP Address for more information.
Your computer should be also set to get an IP address automatically from a DHCP server.
See Set Up Your Computer’s IP Address for more information.
1 Launch your web browser. Enter 192.168.1.1 (the
ZyWALL’s default IP address) as the address.
2 Click Login (the default password 1234 is already
entered).