Toshiba A9 Guida Utente
69
Getting Started
Using external display devices
1
Connect the monitor’s video cable to the RGB (monitor) port
on the back of the computer.
on the back of the computer.
2
Connect the device’s power cable to a live electrical outlet.
3
Turn on the external device.
Your computer will automatically detect the external display
device and activate a screen with display options.
device and activate a screen with display options.
4
Select the settings you desire and click Apply.
5
Click OK.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously. The quickest way to change the display output
settings is to use the display hot key (
choose to use the internal display only, the external device only, or
both simultaneously. The quickest way to change the display output
settings is to use the display hot key (
Fn
+
F5
):
1
Press
Fn
and
F5
simultaneously.
2
While holding down
Fn
, press
F5
repeatedly until the setting
you want takes effect. Briefly pause each time you press the
F5
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(only the first option is available when you do not have an
external monitor attached) (the last option is available only if
you are in Extended Display Mode):
(only the first option is available when you do not have an
external monitor attached) (the last option is available only if
you are in Extended Display Mode):
❖
LCD—Internal display only
❖
LCD + CRT—Internal display and external monitor
simultaneously
simultaneously
❖
CRT—External monitor only
❖
LCD + CRT Multi Monitor—Internal display and external
monitor, with one acting as the primary display and the
other as an extended desktop
monitor, with one acting as the primary display and the
other as an extended desktop