Sanyo PLC-XK3010 Guida Utente

34

This projector has the picture screen resize function, which enables you to customize the image size.

Provide the image to fit the screen size.

Provide the image in its original size. When the original

image  size  is  larger  or  smaller  than  the  screen  size

(104 x 768), the projector enters to the panning mode

automatically.  Use  the  Point  ▲▼◄►  buttons  to  pan

the  image.  When  adjusted,  the  arrows  will  turn  red.

When  reached  to  the  correction  limits,  the  arrows  will

disappear.

Provide the full screen image.



 • This  projector  cannot  display  any  resolution

higher  than  190  x  100.  If  your  computer’s

screen  resolution  is  higher  than  it,  reset  the

resolution to the lower before connecting to the

projector.

 • The  image  data  in  other  than  104  x  768  is

modified to fit the screen size in initial mode.

 •

True  and  Digital  zoom  +/–  are  disabled  and

cannot  be  displayed  when

480i,  575i,  480p

575p, 720p,1035i or 1080i is selected in the PC

System Menu (p. 8).

•  When

True  is  selected  in  the  Screen  menu,

Digital zoom +/- can not be selected.

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select

Screen

and then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons select the desired item

and then press the SELECT button .

Provide the last stored aspect screen image.

Provide the image at the 16:9 wide screen ratio.

Adjust the screen scale and position manually with this

function. Press the

Point

► button at

Custom adj. and

the Custom adjustment menu is displayed on the screen,

you can use the Point ▲▼ buttons to choose the item

you want to adjust.

Scale H/V ..........  Adjust the Horizontal/Vertical screen

scale.

H&V ...................  When set to On, the aspect ratio is

fixed. The

Scale V appears dimmed

and becomes unavailable. Adjust

Scale H, then the screen scale is

automatically modified based on the

aspect ratio.

Position H/V .....  Adjust the Horizontal/Vertical screen

position.

Common ...........  Save the adjusted scale or position

to all the inputs. Press the SELECT

button at

Common to display a

confirmation box. To save the scale or

position, press the SELECT button at

Yes. When Custom is selected, the

saved scale or position is used.

Reset .................  Reset the all adjusted values. Press

the SELECT button at

Reset to

display a confirmation box. To reset,

press the SELECT button at

Yes.



 • When  no  signal  is  detected,

Normal  is  set

automatically .

 • The  adjustable  range  for

Scale  H/V  and

Position  H/V  is  limited  depending  on  the  input

signal.

Scale  the  image  proportionally  to  fit  the  entire  screen.

Either side of image may go over the screen.