Lexmark X548de Guida Utente
M
AKE
SURE
THERE
IS
NO
PACKING
MATERIAL
LEFT
ON
THE
TONER
OR
PRINT
CARTRIDGE
Remove the cartridge and make sure the packing material is properly removed. Reinstall the cartridge.
M
AKE
SURE
THE
TONER
OR
PRINT
CARTRIDGE
IS
NOT
LOW
ON
TONER
When 88.xx [color] cartridge low appears, make sure that toner is distributed evenly among all four
cartridges:
cartridges:
1
Remove the cartridge.
Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.
quality of future print jobs.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
3
Reinsert the cartridge.
Note: If print quality does not improve, then replace the cartridge of the color that is not printing.
If the problem continues, then the printer may need to be serviced. For more information, contact customer support.
Characters have jagged or uneven edges
If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the
software program.
software program.
Clipped images
Try one or more of the following:
C
HECK
THE
GUIDES
Move the width and length guides in the tray to the correct positions for the paper size loaded.
C
HECK
THE
PAPER
SIZE
SETTING
Make sure the paper size setting matches the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Size setting.
2
Before sending the job to print, specify the correct size setting:
•
For Windows users, specify the size from Print Properties.
•
For Macintosh users, specify the size from the Page Setup dialog.
Troubleshooting
267