Lexmark X651DE Manuale Supplementare

If there are basic printer problems, or the printer is unresponsive,

make sure:

The power cord is plugged into the printer and a properly

grounded electrical outlet.

The electrical outlet is not turned off by any switch or breaker.

The printer is not plugged into any surge protectors,

uninterrupted power supplies, or extension cords.

Other electronic equipment plugged into the outlet is

working.

The printer is turned on. Check the printer power switch.

The printer cable is securely attached to the printer and the

host computer, print server, option, or other network device.

All options are properly installed.

The printer driver settings are correct.

Once you have checked each of these possibilities, turn the printer

off, wait for about 10 seconds, and then turn the printer back on.

This often fixes the problem.

The printer self test failed. Turn the printer off, wait about 10

seconds, and then turn the printer on.
If Ready does not appear, then turn the printer off and contact
Customer Support.

The documents contain unavailable fonts.

Open the document you want to print in Adobe Acrobat.

Click the printer icon.
The Print dialog appears.

Select Print as image.

Click OK.

Make sure the USB drive is supported. For information regarding

tested and approved USB flash memory devices, visit the Lexmark
Web site at www.lexmark.com.

These are possible solutions. Try one or more of the following:

Make sure Ready or Power Saver appears on the display
before sending a job to print.

Remove the stack of paper from the standard exit bin.

Load paper in the tray.

Verify that you are using the correct printer software.

If you are using a USB port, make sure you are running a

supported operating system and using compatible printer

software.

Make sure the internal print server is properly installed and

that the printer is connected to the network.

Print a network setup page and check that the status shows

Connected. If the status is Not Connected, check the

network cables, and then try printing the network setup

page again. Contact your system support person to make

sure the network is functioning correctly.

Copies of the printer software are also available on the Lexmark
Web site at www.lexmark.com.

For more information, visit the Lexmark Web site at

Check the cable connections to the printer and print server to

make sure they are secure.
For more information, see the setup documentation that came

with the printer.

These are possible solutions. Try one or more of the following:

The print job may contain a formatting error or invalid data.

Delete the print job, and then print it again.

For PDF documents, recreate the PDF and then print it

again.

Free up additional printer memory by scrolling through the list

of held jobs and deleting some of them.