Funai dv-220sl8 Guida Utente

– 14 –

EN

•  If you have not set the clock, “CLOCK SET” menu will appear at step 2. Refer to “Clock Setting” on page 8.
•  You cannot set the ending time for the satellite link timer recording on this unit.
•  Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.
•  When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.

Set the desired start minutes.
If you wish to go back to the left, press [s ].

Press [B] to set satellite link standby mode.

•    indicator on this unit lights up and the unit goes to the DVD 

mode. If you do not use DVD function, turn off the unit.

•  Satellite unit must be turned on for VCR satellite link to start.

If cable/satellite box is not set to output signals, satellite link will 
remain in standby mode.

To cancel the satellite link function in standby mode:
Press [T-SET] on the remote control or [STOP/EJECT C A] on this 
unit.

To cancel the satellite link function while the satellite link 
recording is in progress:
Press [STOP/EJECT C A] on this unit.

Warning:  Unauthorized recordings of copyrighted cassette tapes 

may be an infringement of copyright laws. 

1)  Insert a pre-recorded cassette tape into another external 

device for playback.

2)  Insert a recordable cassette tape into this unit for recording.
3) Press 

[SPEED] on the remote control to select recording 

speed (SP or SLP).

4) Press 

[INPUT SELECT] on the remote control to select L1 or 

L2. Choose L1 if device is connected to rear input jacks, or L2 
if connected to the front. Refer to 

“

Front & Rear Terminals

”

 on 

page 9 for more details.

5) Press 

[REC/OTR] on the unit.

6)  Press “PLAY” button on the external device.
7)  To stop recording, press [STOP/EJECT C A] on this unit, 

then stop playback of the external device.

• For best results during dubbing, use buttons on this unit whenever 

possible. The remote control might affect another device’s operation.

• Always use video-quality shielded cables with RCA-type connectors. 

Standard audio cables are not recommended.

• L2 input jacks are on the front of this unit.

Press [SPEED] to select the desired tape speed.

In stop mode, press [SETUP].

Select “SATELLITE LINK”. 
Then press [B] to go to next step.

Set the desired start hour. 
Then press [B] to go to next step.

• The hour can be selected from 1-12 with AM or PM.
•  When the external tuner signal is stopped, recording will be stopped.

             - M E N U -

 
 TIMER 

PROGRAMMING

  B SATELLITE LINK
 AUTO 

REPEAT [OFF]

 CLOCK 

SET

 LANGUAGE 

SELECT

SATELLITE LINK

0 1  :  3 0   PM

[ON]

e.g.) In case of the timer recording is programmed in the middle 
         of the satellite link timer recording

timer recording

recording result

satellite link

e.g.) In case of the timer recording is overlapped on the existing 
         satellite link timer recording.

timer recording

recording result

satellite link

e.g.) In case of the satellite link timer recording is overlapped 
         on the existing timer recording.

timer recording

recording result

satellite link

SETUP

or

or

•  Satellite link accepts only the connection from L1 (rear) with the 

external tuner. (The connection from L2 cannot read any signals 
from the cable/satellite box.)

•  The external tuner should be equipped with some kind of timer 

function. Using timer function of the tuner, set it to output audio/video 
signals when it comes to the time you want to start recording, and 
stop output audio/video signals when it comes to the time you want to 
finish recording. Refer to the tuner’s manual on how to set the timer.

•  Make sure to turn off the tuner when you finish setting.

 

VCR

VCR

 

SP

SPEED

T60

T120

T160

   SP mode

1hour

2hours

2-2/3hours

   SLP mode

3hours 

6hours

8hours

SATELLITE LINK

1 2  :  0 0   AM

You can set the unit to start recording whenever it detects a video signal from the external tuner.

external tuner

RCA audio/video cables

L1

or

output jacks of 

external device

rear of the unit

RCA audio/video 

cables

L1

You can use a video disc player, cable/satellite box or other audio/video 
component with audio/video output jacks.

SATELLITE LINK

0 1  :  0 0   PM

or