Cisco me 3400 Guida Di Riferimento
2-107
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
ethernet uni id
ethernet uni id
Use the ethernet uni interface configuration command to create an Ethernet user-network interface
(UNI) ID. Use the no form of this command to remove the UNI ID.
(UNI) ID. Use the no form of this command to remove the UNI ID.
ethernet uni id name
no ethernet uni id
This command is available only if your switch is running the metro IP access or metro access image.
Syntax Description
Defaults
No UNI IDs are created.
Command Modes
Interface configuration
Command History
Usage Guidelines
When you configure a UNI ID on a port, that ID is used as the default name for all maintenance end
points (MEPs) configured on the port.
points (MEPs) configured on the port.
You must enter the ethernet uni id name command on all ports that are directly connected to
customer-edge (CE) devices. If the specified ID is not unique on the device, an error message appears.
customer-edge (CE) devices. If the specified ID is not unique on the device, an error message appears.
Examples
This example shows how to identify a unique UNI:
Switch(config-if)# ethernet uni id test2
Related Commands
name
Identify an Ethernet UNI ID. The name should be unique for all UNIs that
are part of a given service instance and can be up to 64 characters in length.
are part of a given service instance and can be up to 64 characters in length.
Release
Modification
12.2(25)SEG
This command was introduced.
Command
Description
Displays information about Ethernet service instances on an interface,
including service type.
including service type.