Adesso WKB-3000UB Guida Utente

Enjoy the freedom of wireless connectivity 

with Adesso's wireless mini Keyboard with 
Optical trackball. The keyboard and trackball 

allow you to work up to 100 feet away from 

the USB receiver connected to your 

computer. In addition, the optical trackball 

provides great accuracy with minimal hand 

movement due to its 800 dpi resolution. The 
lightweight  and stylish keyboard offers 

mobility and comfort wherever you type. 

Take complete control of your desktop with 

hotkeys. The different hotkeys give you quick 

access to some of your most common tasks 

such as e-mail access, volume control, and 
launching your web browser - at the push of 

a button. 

 

•  Streamlined full-featured RF 

keyboard built-in Track Ball, with 

Optical Technology

  

•  2.4 GHz radio frequency, 100 feet 

effective working range, USB port

  

•  360-degree navigation, sleek and 

elegant design.

  

•  With notebook keyboard module 

enables handheld operation and 

effortless typing. 

 

• 

One (1) WKB-3000UB Keyboard 

• 

One (1) User’s Guide 

 

 

 

1.  Open the battery cover under the 

keyboard and place 4 AA batteries 
inside the battery compartment. Close 

the battery compartment cover. 

2.  Plug the RF Receiver of the keyboard 

into the USB ports of your computer. 

3.  Turn on your computer 

4.  Setting ID: 

a.  Press ID button on Dongle 

receiver. (Picture A), the 

Green LED will flash which 

means the ID is searching. 

b.  Press the ID button on the 

keyboard. (Picture B), After 

you please the ID button on 

the keyboard, the green LED 

light will turn off on the 

dongle receiver which means 
the connection was successful. 

 

       

 

 

 

•  RF Signal LED on the receiver will 

flash when the keyboard is being 

used. 

•  When Battery Low LED lights, it 

means the keyboard requires a 

change of batteries.   
 

If you cannot get your keyboard to work 

after installation, please try the following: 

1.  Make sure you have connected the 

receiver correctly to the computer.  
The receiver has been properly 

plugged onto computer's USB ports. 

2.  Make sure you have inserted four 

AA batteries into its compartment 

correctly. 

3.  Move the keyboard closer to the 

receiver. 

4.  If using more than two units and 

interfere occurred, please reset ID 

again.