GE GDWF100R Istruzione Sull'Installazione

• The rough cabinet opening must have a minimum width 

and depth of 24" and height of 34-1/2" ± 1/4" from the fl oor 
to the underside of the countertop.

• The back wall should be free of pipes or wires.
• Adjacent cabinets should be square and plumb to ensure 

a good fi t. Refer to Figure A

• For a corner installation, allow 2" minimum clearance 

between the dishwasher and the adjacent wall.

• Provide at least 28-3/8" in front of the dishwasher to allow 

the dishwasher door to open fully. Refer to Figure B

• Make sure the fl oor is level inside the opening and even with 

the fi nished fl oor of the kitchen. This will facilitate removal 
of the dishwasher at a later date for service, if needed.

Special consideration for a dishwasher installed on 
a elevated platform
The elevated platform must be flat and level.

Cabinets 

Square 

and 

Plumb 

Floor MUST 

be Even with 

Room Floor 

This Wall Area

Must Be Free of

Pipes or Wires 

34-1/2" ± 1/4" 

Underside of 

Countertop 

to Floor 

24" 

Min. 

24" Min. 

5" 5" 

4" 

4" 

6" 

• The dishwasher must be installed no more than 10 feet 

from sink for proper drainage.

• The dishwasher must be fully enclosed on the top, sides 

and back.

• The dishwasher must not support any part of the enclosure.

2" Minimum

Countertop

Dishwasher

28-3/8" Minimum

05A-1183F

Clearances:
In a corner installation, provide at 
least 2" clearance between the 
dishwasher and the adjacent 
cabinet, wall, or other appliance. 

Provide at least 28-3/8" of clearance 
in front of the dishwasher.